SOPPEC Line Tracing 500 Marking Paint

SOPPEC Line Tracing 500 Marking Paint is a professional line marking paint designed to create crisp, highly visible lines on indoor and outdoor surfaces. Ideal for logistics warehouses, sports centers, grass sports fields, cycle paths, parking lots, and other low-traffic areas, Tracing 500 combines excellent adhesion with good weather resistance and fast drying performance. Its purpose-designed nozzle produces clean, sharp lines from approximately 4 cm to 10 cm (1.6″ to 3.9″) wide for efficient floor, pavement, and ground marking.

• Available in three colors: White, Blue, and Yellow
• Ideal for line marking in warehouses, sports facilities, grass sports fields, cycle paths, parking lots, and other low-traffic areas
• Excellent adhesion with good weather resistance for indoor and outdoor applications
• Purpose-designed nozzle produces crisp, sharp lines approximately 4 cm to 10 cm (1.6″ to 3.9″) wide
• Fast drying time of approximately 15 to 20 minutes or less
• Recommended application temperature range of 5°C to 30°C (41°F to 86°F)
• Can be applied manually or with compatible SOPPEC line marking equipment, including line marking trolleys, spray gun handles, and the One-Wheel Marking Paint Applicator
• Acrylic binder with mineral and organic pigments free from lead and cadmium; solvent blend is free from chlorinated solvents and aromatic compounds including toluene and xylene
• Each case contains 12 aerosol cans

For best results, thoroughly clean the surface before application to remove dust, dirt, grease, and other contaminants. Shake the can vigorously in an upside-down position before use and apply head down, adjusting the aerosol position in the applicator to achieve the desired line width. After use, purge the can head up until only gas is released to clean the valve and nozzle.

For new concrete, allow the surface to dry completely before marking. SOPPEC recommends a minimum of 3 to 4 weeks. For new asphalt, SOPPEC recommends waiting at least 15 days before line marking. Test compatibility before applying to synthetic, plastic, PVC, varnished, epoxy, polyurethane, or previously painted floors.

Crisp lines. Reliable adhesion. Built for efficient indoor and outdoor line marking.